Read My Heart is a personalised, non-invasive, handheld heart-monitoring device designed especially for individual and family use. It is not diagnostic in nature, but only for recording.

It allows user to measure and record electrical activities of heart anywhere and anytime. The electrical signals from the heart are obtained by placing patient’s thumbs on ReadMyHeart’s specially designed conducting plates without using any complicated wires or conducting gel. The second method is by using external electrode cable and adhesive ECG electrode pads if the user wants to cross check thump based measurements.



ReadMyHeart takes 30 seconds for each measurement. The device will record 15 seconds of the “modified ECG” signals and instantly display the average of 3 parameters on the LCD display, the average heart rate (HR), ST segment and QRS interval. These Parameters are not the traditional standard ECG readings, but rather a “modified Lead I-ECG”

ReadMyHeart can transfer all the recoded measurements to a personal computer through USB connection for easy viewing, managing, printing and e-mailing of ECG Recordings.

ReadMyHeart uses two conductive electrode plates to measure cardiac activities, unlike traditional ECG device, which requires at least 3 electrodes. ECG Measured by ReadMyHeart is designed as a modified Lead I-ECG.

These parameters from ReadMyHeart are only for user reference. For interpretation of the parameters, please consult professional physicians. Additional standard 12 Lead ECG recording may need to be performed for precise findings.